Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

Sennheiser headphones one ear not working [Solved]

We’re passionate about music and our recommendations are genuine. If you buy through links on our site, we may earn a small affiliate commission at no extra cost to you.

It can be frustrating and inconvenient if your Sennheiser headphones suddenly stop working on one side. And it’s not like you can just go out and buy a new pair right away. Instead, you might have to wait until payday or even save up for months before buying another set of high-end headphones. But what happens when you need them now? What if the problem only affects one earbud? How do you fix these issues without spending too much money?

Fortunately, there are ways you can fix this problem yourself without having to purchase a new set of headphones or toss the old ones away for good.

Following these simple steps will help you fix your Sennheiser headphones if one ear is not working in just 15 minutes! So please don’t throw away those expensive headsets yet. You may still be able to make them work like new again!

Fix for Sennheiser wireless headphones

Turn off/on your headphones

This is a no-brainer. Sometimes this is an easy fix to many problems that occur with the headphones.

Reset your headphones

Try resetting your headphones using the manuals that come with them.

Restart your device

Sometimes, updating your software or audio app can cause one side of the headphones to stop working. Restarting, in this case, is usually enough to solve the issue, and sometimes even skipping all these steps if it’s not necessary will do just fine.

Test with another headphones pair

If the issue is not resolved using the above steps, use another pair of headphones and check if the issue persists. If you still face the problem, the problem is not with your headphones. Rather it lies within the audio source. However, if the issue is gone, it means your headphones are faulty.

Check the left/right side balance

If your headphone is connected to a PC, check if the device’s sound setting is properly balanced on both left and right sides.

The following video might come in handy to perform this step:

Check the track type (Mono/Stereo)

Did you know that there are two types of sound? They are Mono and Stereo. Mono signals are recorded and played back using just one audio channel, while stereo sounds require two channels to playback.

It’s easy for your brain not always to notice when something isn’t playing at full volume since almost everyone has experienced this. If you are listening to a Mono track, you will hear the sound on one side only.

Insert the audio cable plug while playing audio

Use the audio cable provided with the headphones. Connect it on both ends (headphones and PC/phone) and check if the problem is resolved.

Fix for Sennheiser wired headphones

Restart your device

If you’re experiencing issues with your headphones after a software or audio app update, just restarting the source may resolve it.

Check the wiring

Wired headphones are designed to be easy and convenient, but they can also become damaged quickly if you don’t take proper care of them. Wired headset cables get worn down by rubbing against clothing or other materials while in use, especially when walking around. If your wire is too loose from continual friction, then it may come disconnected from its socket, which may lead to problems with one side of your Sennheiser headphones not working. Moreover, headphones with poor connections might not produce any audio at all!

However, repairing your current pair of wired headsets is possible by rewiring them yourself using soldering techniques. The method is easy enough for beginners to learn how to do it on their own.

Clean the headphone jack

Lint, dirt, and other particles can get trapped in the headphone jack of your phone or PC. This causes a loose connection between it and another device if you use headphones that only work when plugged into one computer but not others- consider cleaning out this area with toothpicks or cotton swabs.

Test with another headphones pair

If the issue is not resolved using the above steps, use another pair of headphones and check if the issue persists. If you still face the problem, the problem is not with your headphones. Rather it lies within the audio source. However, if the issue is gone, it means your headphones are faulty.

Use alternative audio jacks

Audio jacks are the wires that allow you to plug your headphones in. Pull out the headphone wire and insert it into a different port on the computer or device to check if the problem is gone.

Check the left/right side balance

If your headphone is connected to a PC, check from the device’s sound setting in the control panel if they are properly balanced on both left and right sides.

Check the track type you are listing to (Mono/Stereo)

Check if the track you listen to is Mono or stereo. Mono signals are recorded and played back using just one audio channel, while stereo sounds require two channels to playback. Therefore, if you listen to a Mono track, you will only hear the sound on one side.

Check if the headphone speaker is damaged

Serious earpiece damage is a common issue that affects all types of headsets. Check your hardware before blaming software for bad sound quality or noise interference in the headphones you use.

FAQ

How can I fix the static noise in one ear of my Sennheiser headphones?

  • Check the wirings. Sometimes loose or disconnected wires lead to static noise. Make the wires tight and firm in the best way possible.
  • Check the aux port. If there is any dirt or debris in it, clean it properly.
  • Update the audio drivers. Sometimes updating the driver may help solve the buzzing/static noise. First, check if there is any update available for the device. Then, update the device and restart it afterward.
  • Re-configure audio settings.
  • Check if the headphone speaker is damaged. Check your hardware before blaming software for bad sound quality or noise interference in the headphones you use.

Final words

We hope that this article has been helpful to you. Follow these easy steps to learn how to fix headphones when one side isn’t working correctly anymore. It won’t take much time or effort at all, but you will have a much better functioning set of headphones once you are done with the process.

Before buying a new pair of headsets, keep in mind that fixing your headphones yourself will save money and help reduce e-waste.